Operating Mode
Batch/Semi-Continuous
Host Equipment
Emissions Port (Vent)
Yes
Special Input/Output Ports
No
An Inoculum Preparation Procedure in a Roller Bottle can be created by selecting the following menu option:
Unit Procedures } Inoculum Preparation } in a Roller Bottle
|
|
Operating Mode |
Batch/Semi-Continuous |
|
Host Equipment |
||
|
Emissions Port (Vent) |
Yes |
|
|
Special Input/Output Ports |
No |
|
|
|
|
This procedure is used to represent a sequence of operations that take place in a disposable Roller Bottle for inoculum preparation and other applications.
None.
The following operation types are currently supported in the context of this unit procedure:
● Agitate, see Agitation
● Charge, see Charge
● Cool, see Batch Cooling
● Crystallize, see Batch Crystallization
● Distill, see Batch Distillation
● Evacuate, see Evacuation
● Extract / Phase Split, see Batch Extraction / Phase Split
● Ferment (Kinetic), see Batch Kinetic Fermentation
● Ferment (Perfusion), see Perfusion Stoichiometric Fermentation
● Ferment (Stoichiometric), see Batch Stoichiometric Fermentation
● Gas Sweep, see Gas Sweep
● Heat, see Batch Heating
● Hold, see Holding
● Pressurize, see Pressurization
● Pull In, see Pull In
● Pull Out, see Pull Out
● Purge / Inert, see Purging / Inerting
● React (Equilibrium), see Batch Equilibrium Reaction
● React (Kinetic), see Batch Kinetic Reaction
● React (Stoichiometric), see Batch Stoichiometric Reaction
● Sample, see Sampling
● Split (Component Flow), see Batch Component Splitting
● Transfer In, see Transfer In
● Transfer Out, see Transfer Out
● Vaporize / Solvent Switch, see Batch Vaporization / Solvent Switch
● Vent, see Batch Vaporization / Solvent Switch: Mat. Balance Tab (Solvent Switch Mode)
The following procedures offer a similar functionality:
● Inoculum Preparation Procedure in a Rocking Bioreactor
● Inoculum Preparation Procedure in a T-Flask
● Inoculum Preparation Procedure in a Shake Flask
● Inoculum Preparation Procedure in a Test Tube
● Batch Vessel Procedure in a Reactor