Use this operation to simulation a perfusion stoichiometric fermentation.
● Batch Vessel Procedure in a Disposable Bioreactor
● Batch Vessel Procedure in a Disposable Seed Bioreactor
● Batch Vessel Procedure in a Fermentor
● Batch Vessel Procedure in a Seed Fermentor
● Batch Vessel Procedure in a Disposable Bioreactor
● Inoculum Preparation Procedure in a Rocking Bioreactor
● Inoculum Preparation Procedure in a Roller Bottle
● Inoculum Preparation Procedure in a T-Flask
● Inoculum Preparation Procedure in a Shake Flask
● Inoculum Preparation Procedure in a Test Tube
The model for this operation is identical to the Fermentation Operation (Batch Stoichiometric) Model (see Batch Stoichiometric Fermentation: Modeling Calculations) except for the fact that instead of the Fed Batch options the Perfusion Options are available. Using the perfusion option implies that material is constantly fed and removed from the system.
See Vacuum Pump Auxiliary Equipment Calculations.
The interface of this operation has the following tabs:
● Oper. Cond’s, see Fermentation Operations: Oper. Conds Tab
● Volumes, see Batch Vessel Operations: Volumes Tab
● Perfusion, see Perfusion Stoichiometric Fermentation: Perfusion Tab
● Reactions, see Stoichiometric Reaction/Fermentation Operation: Reactions Tab
● Vent/Emissions, see Reaction Operations: Vent/Emissions Tab
● Labor, etc, see Operations Dialog: Labor etc. Tab
● Description, see Operations Dialog: Description Tab
● Batch Sheet, see Operations Dialog: Batch Sheet Tab
● Scheduling, see Operations Dialog: Scheduling Tab