This operation is used to simulate material sampling at different stages of a vessel procedure.
● Batch Vessel Procedure in a Reactor
● Batch Vessel Procedure in a Seed Reactor
● Batch Vessel Procedure in a Bioreactor
● Batch Vessel Procedure in a Seed Bioreactor
● Batch Vessel Procedure in a Disposable Bioreactor
● Batch Vessel Procedure in a Disposable Seed Bioreactor
● Batch Vessel Procedure in a Fermentor
● Batch Vessel Procedure in a Seed Fermentor
● Batch Vessel Procedure in a Disposable Bioreactor
● Inoculum Preparation Procedure in a Rocking Bioreactor
● Inoculum Preparation Procedure in a Roller Bottle
● Inoculum Preparation Procedure in a T-Flask
● Inoculum Preparation Procedure in a Shake Flask
● Inoculum Preparation Procedure in a Test Tube
● Batch Storage in a Blending Tank Procedure
● Batch Storage in a Flat Bottom Tank Procedure
● Batch Storage in a Receiver Tank Procedure
● Batch Storage in a Horizontal Tank Procedure
● Batch Storage in a Vertical-on-Legs Tank Procedure
● Batch Storage in a Drum Procedure
● Batch Storage in a Drum Procedure
● Batch 1x1 Generic Box Procedure
● Batch 3x3 Generic Box Procedure
● Batch 5x5 Generic Box Procedure
● Batch 10x10 Generic Box Procedure
The user specifies the amount used for sampling and whether the sample is taken from the gas or liquid phase. This amount is removed from the equipment contents.
See Batch Vessel Operations: Equipment Sizing.
The interface of this operation has the following tabs:
● Oper. Cond’s, see Sampling: Oper. Conds Tab
● Volumes, see Batch Vessel Operations: Volumes Tab
● Labor, etc, see Operations Dialog: Labor etc. Tab
● Description, see Operations Dialog: Description Tab
● Batch Sheet, see Operations Dialog: Batch Sheet Tab
● Scheduling, see Operations Dialog: Scheduling Tab