Batch 5x5 Generic Box Procedure

Overview

A Batch 5x5 Generic Box Procedure can be created by selecting the following menu option:
Unit Procedures } Generic Boxes } Bulk Flow } Batch } 

	Operating Mode	Batch/Semi-Continuous
	Host Equipment	Batch 5x5 GBX
	Emissions Port (Vent)	No
	Special Input/Output Ports	No

5x5

This unit procedure can be used to represent batch processing steps that are not explicitly available in the current version of SuperPro Designer.

Special Inputs / Outputs

None.

Operations

The following operation types are currently supported in the context of this unit procedure:

●      Agitate, see Agitation

●      Charge, see Charge

●      CIP, see Clean-In-Place (CIP)

●      Cool, see Batch Cooling

●      Crystallize, see Batch Crystallization

●      Distil, see Batch Distillation

●      Extract / Phase Split, see Batch Extraction / Phase Split

●      Heat, see Batch Heating

●      Hold, see Holding

●      Load and Split, see Load and Split

●      Pressurize, see Pressurization

●      Pull In, see Pull In

●      Pull Out, see Pull Out

●      React (Equilibrium), see Batch Equilibrium Reaction

●      React (Kinetic), see Batch Kinetic Reaction

●      React (Stoichiometric), see Batch Stoichiometric Reaction

●      Sample, see Sampling

●      SIP, see Steam-In-Place (SIP)

●      Split (Component Flow), see Batch Component Splitting

●      Transfer In, see Transfer In

●      Transfer Out, see Transfer Out

●      Vaporize / Solvent Switch, see Batch Vaporization / Solvent Switch

See Also

The following procedures offer a similar functionality:

●      Batch 1x1 Generic Box Procedure

●      Batch 3x3 Generic Box Procedure

●      Batch 10x10 Generic Box Procedure