A Batch 10x10 Generic Box Procedure can be created by selecting the following menu option:
Unit Procedures } Generic Boxes } Bulk Flow } Batch }
|
Operating Mode |
Batch/Semi-Continuous |
Host Equipment |
||
Emissions Port (Vent) |
No |
|
Special Input/Output Ports |
No |
|
|
|
10x10
This unit procedure can be used to represent batch processing steps that are not explicitly available in the current version of SuperPro Designer.
None.
The following operation types are currently supported in the context of this unit procedure:
● Agitate, see Agitation
● Charge, see Charge
● CIP, see Clean-In-Place (CIP)
● Cool, see Batch Cooling
● Crystallize, see Batch Crystallization
● Distil, see Batch Distillation
● Extract / Phase Split, see Batch Extraction / Phase Split
● Heat, see Batch Heating
● Hold, see Holding
● Load and Split, see Load and Split
● Pressurize, see Pressurization
● Pull In, see Pull In
● Pull Out, see Pull Out
● React (Equilibrium), see Batch Equilibrium Reaction
● React (Kinetic), see Batch Kinetic Reaction
● React (Stoichiometric), see Batch Stoichiometric Reaction
● Sample, see Sampling
● SIP, see Steam-In-Place (SIP)
● Split (Component Flow), see Batch Component Splitting
● Transfer In, see Transfer In
● Transfer Out, see Transfer Out
● Vaporize / Solvent Switch, see Batch Vaporization / Solvent Switch
The following procedures offer a similar functionality:
● Batch 1x1 Generic Box Procedure
● Batch 3x3 Generic Box Procedure
● Batch 5x5 Generic Box Procedure