Operating Mode
Batch/Semi-Continuous
Host Equipment
Emissions Port (Vent)
Yes
Special Input/Output Ports
No
A Batch Storage in a Horizontal Tank Procedure can be created by selecting the following menu option:
Unit Procedures } Storage/Blending } Bulk } Batch } in a Horizontal Tank
|
|
Operating Mode |
Batch/Semi-Continuous |
|
Host Equipment |
||
|
Emissions Port (Vent) |
Yes |
|
|
Special Input/Output Ports |
No |
|
|
|
|
This unit procedure model simulates batch-wise storage in a horizontal tank. A number of other operations can be handled as part of this procedure.
None.
The following operation types are currently supported in the context of this unit procedure:
● Store, see Batch Storage
● Agitate, see Agitation
● Charge, see Charge
● CIP, see Clean-In-Place (CIP)
● Cool, see Batch Cooling
● Evacuate, see Evacuation
● Extract / Phase Split, see Batch Extraction / Phase Split
● Gas Sweep, see Gas Sweep
● Heat, see Batch Heating
● Hold, see Holding
● Pressurize, see Pressurization
● Pull In, see Pull In
● Pull Out, see Pull Out
● Purge / Inert, see Purging / Inerting
● React (Stoichiometric), see Batch Stoichiometric Reaction
● Sample, see Sampling
● SIP, see Steam-In-Place (SIP)
● Split (Component Flow), see Batch Component Splitting
● Transfer In, see Transfer In
● Transfer Out, see Transfer Out
● Vent, see Batch Vaporization / Solvent Switch: Mat. Balance Tab (Solvent Switch Mode)
Note that the “Agitate” operation is only available when the “Mixing” feature on the equipment data dialog is checked.
The following procedures offer a similar functionality:
● Batch Storage in a Blending Tank Procedure
● Batch Storage in a Flat Bottom Tank Procedure
● Batch Storage in a Receiver Tank Procedure
● Batch Storage in a Vertical-on-Legs Tank Procedure
● Batch Storage in a Drum Procedure
● Batch Storage in a Tote Procedure
● Continuous Storage in a Horizontal Tank Procedure