Operating Mode
Batch / Semi-Continuous
Host Equipment
Emissions Port (Vent)
Yes
Special Input/Output Ports
No
A Batch Storage in a Disposable Generic Container Procedure can be created by selecting the following menu option:
Unit Procedures } Storage/Blending } in a Disposable } Generic Container
|
|
Operating Mode |
Batch / Semi-Continuous |
|
Host Equipment |
||
|
Emissions Port (Vent) |
Yes |
|
|
Special Input/Output Ports |
No |
|
|
|
|
This procedure can be executed in batch/semi continuous mode only. It is typically used to handle storage of material in disposable containers of the ‘Generic Container’ consumable type (e.g., plastic bags, aluminum cans, etc.) that are either self-standing (i.e., there is no equipment behind them in reality) or mounted on a skid or rack. Besides storage, anumber of other operations can be handled as part of this procedure.
None.
The following operation types are currently supported in the context of this unit procedure:
● Store, see Batch Storage
● Agitate, see Agitation
● Charge, see Charge
● Cool, see Batch Cooling
● Evacuate, see Evacuation
● Extract / Phase Split, see Batch Extraction / Phase Split
● Gas Sweep, see Gas Sweep
● Heat, see Batch Heating
● Hold, see Holding
● Pull In, see Pull In
● Pull Out, see Pull Out
● Purge / Inert, see Purging / Inerting
● React (Stoichiometric), see Batch Stoichiometric Reaction
● Sample, see Sampling
● Split (Component Flow), see Batch Component Splitting
● Transfer In, see Transfer In
● Transfer Out, see Transfer Out
● Vent, see Batch Vaporization / Solvent Switch: Mat. Balance Tab (Solvent Switch Mode)
The following procedures offer a similar functionality:
● Batch Storage in a Disposable Large Bag (on a Skid) Procedure