Perfusion Stoichiometric Fermentation: Perfusion Tab

Perfusion.jpg
Variable Definitions, Ranges and Default Values

The following table shows a brief description of the variables appearing in this tab. The table also displays their default values and their generally acceptable range:

Variable

Default Value

Range

 

Consider Perfusion Mode of Operation
Check this box to consider perfusion mode of operation.

No

Yes/No

Scalable
Check this box to scale operation data in perfusion mode.

No

Yes/No

Inlet Stream
Indicates the input port that is connected to the inlet stream. Click on the list box to bring up a list of available input ports in order to select one. If an input stream is already present at the selected port, then the button next to the selection is active. Click on the button to bring up the attached stream’s simulation dialog in order to provide its composition.

<None>

Any Input Port

Outlet Stream
Indicates the output port that is connected to the outlet stream. Click on the list box to bring up a list of available output ports in order to select one.

<None>

Any Output Port

Remove Entire Contents at the end of the process

No

Yes/No

Relative Perfusion Rate (Working Volumes/day)

0.0

Positive

Absolute Perfusion Rate (L/h)

0.0

Positive

Symbol Key: User-specified value (always input); Calculated value (always output); Sometimes input, sometimes output

Specification Choices / Comments

Specify whether there is simultaneous feed and removal of material during the reaction, and select the inlet/outlet stream. Then specify either the absolute perfusion rate (volumetric flow rate of material fed and removed) or the relative rate (with respect to the working volume).The required flow of the feed stream is propagated backwards, through the network of connectivity.