Operating Mode
Continuous or Semi-Continuous
Host Equipment
Emissions Port (Vent)
Yes
Special Input/Output Ports
Yes
An Inclined Plate (IP) Clarification Procedure can be created by selecting the following menu option:
Unit Procedures } Sedimentation } IP Clarification
|
|
Operating Mode |
Continuous or Semi-Continuous |
|
Host Equipment |
||
|
Emissions Port (Vent) |
Yes |
|
|
Special Input/Output Ports |
Yes |
|
|
|
|
This unit procedure simulates removal of solid particles and/or oil globules by an inclined plate separator. The removal percentage of particulate and oil globule components is either specified by the user or calculated by the program. The model also performs rigorous VOC emission calculations.
● Water: the designated output port for clarified water.
● Oil: the designated output port for oil.
● Sludge: the designated output port for sludge.
The following operation types are currently supported in the context of this unit procedure:
● Clarify, see Inclined Plate (IP) Clarification
● Hold, see Holding
Note that operation Hold is only available in semi-continuous operating mode.
The following procedures offer a similar functionality:
Centrifugation in a Disk-Stack Centrifuge Procedure
Centrifugation in a Decanter Procedure
Centrifugation in a Hydrocyclone Procedure