Operating Mode
Batch/Semi-Continuous
Host Equipment
Emissions Port (Vent)
No
Special Input/Output Ports
Yes
A Tray Drying Procedure can be created by selecting the following menu option:
Unit Procedures } Drying/Granulation } Tray Drying
|
|
Operating Mode |
Batch/Semi-Continuous |
|
Host Equipment |
||
|
Emissions Port (Vent) |
No |
|
|
Special Input/Output Ports |
Yes |
|
|
|
|
This unit procedure simulates drying of high value materials, such as pharmaceuticals and dyes, in a tray dryer.
● Feed: the designated input port for the feed stream.
● Air Input: the designated input port for the air stream.
● Air Output: the designated output port for the air stream.
● Output: the designated output port for the product stream.
The following operation types are currently supported in the context of this unit procedure:
● Dry, see Tray Drying
● Charge, see Charge
● CIP, see Clean-In-Place (CIP)
● Hold, see Holding
SIP, see Steam-In-Place (SIP)
Transfer In, see Transfer In
Transfer Out, see Transfer Out
The following procedures offer a similar functionality: