Drum Drying Procedure

Overview

A Drum Drying Procedure can be created by selecting the following menu option:
Unit Procedures } Drying/Granulation } Drum

DrumDryer.bmp

 

Operating Mode

Continuous or Semi-Continuous

Host Equipment

Drum Dryer

Emissions Port (Vent)

No

Special Input/Output Ports

Yes

 

 

This unit procedure simulates drum drying under atmospheric pressure or under vacuum.

Special Inputs / Outputs

      Vapor: the designated output port for vapor.

      Product: the designated output port for the product stream.

Operations

The following operation types are currently supported in the context of this unit procedure:

      Dry, see Drum Drying

      CIP, see Clean-In-Place (CIP)

      Hold, see Holding

      SIP, see Steam-In-Place (SIP)

Note that operations CIP, Hold, and SIP are only available in semi-continuous operating mode.

SEe Also

The following procedures offer a similar functionality:

      Tray Drying Procedure

      Freeze Drying Procedure

      Spray Drying Procedure

      Fluid Bed Drying Procedure

      Rotary Drying Procedure