A Centrifugation in a Basket Centrifuge (Bottom Discharge) Procedure can be created by selecting the following menu option:
Unit Procedures } Centrifugation } in a Basket Centrifuge (Bottom Discharge)
|
Operating Mode |
Batch/Semi-Continuous |
Host Equipment |
||
Emissions Port (Vent) |
Yes |
|
Special Input/Output Ports |
No |
|
|
|
This unit procedure simulates centrifugal filtration for removing suspended solids from a slurry. Cake and cake removal (transfer out) also can be modeled. Basket centrifuges are commonly used in the pharmaceutical and specialty chemical industries to recover precipitated or crystallized product.
None.
The following operation types are currently supported in the context of this unit procedure:
● Filter, see Cloth Filtration
● Wash Cake, see Cake Wash
● Charge, see Charge
● CIP, see Clean-In-Place (CIP)
● Gas Sweep, see Gas Sweep
● Hold, see Holding
● Purge / Inert, see Purging / Inerting
● SIP, see Steam-In-Place (SIP)
● Transfer In, see Transfer In
● Transfer Out, see Transfer Out
The following procedures offer a similar functionality:
● Centrifugation in a Basket Centrifuge (Top Discharge) Procedure
● Plate and Frame Filtration Procedure
● Nutsche Filtration Procedure
● Centrifugation in a Decanter Procedure
● Centrifugation in a Disk-Stack Centrifuge Procedure