A Tablet Coating Procedure can be created by selecting the following menu option:
Unit Procedures } Formulation & Packaging } Tablet Coating
|
Operating Mode |
Batch/Semi-Continuous |
Host Equipment |
||
Emissions Port (Vent) |
Yes |
|
Special Input/Output Ports |
Yes |
|
|
|
This unit procedure simulates the coating of tablets or other discrete entities using a Tablet Coater.
● Air Input: the designated input port for air.
● Coating Solution: the designated input port for the coating solution.
● Tablets: the designated input port for the tablets.
The following operation types are currently supported in the context of this unit procedure:
● Coat, see Tablet Coating
● Charge, see Charge
● CIP, see Clean-In-Place (CIP)
● Hold, see Holding
● Pull Out, see Pull Out
● SIP, see Steam-In-Place (SIP)
● Transfer In, see Transfer In
● Transfer Out, see Transfer Out
The following procedures offer a similar functionality:
● Tableting (General) Procedure
● Tableting (Pharma) Procedure