A Filling Procedure can be created by selecting the following menu option:
Unit Procedures } Formulation & Packaging } Filling
|
Operating Mode |
Continuous or Semi-Continuous |
Host Equipment |
||
Emissions Port (Vent) |
No |
|
Special Input/Output Ports |
Yes |
|
|
|
This unit procedure simulates the filling of a container with a certain amount of bulk material.
● Bulk Feed: the designated input port for the bulk feed.
● Empty Containers: the designated input port for the empty containers.
The following operation types are currently supported in the context of this unit procedure:
● Fill, see Filling
● CIP, see Clean-In-Place (CIP)
● Hold, see Holding
● SIP, see Steam-In-Place (SIP)
Note that operations CIP, Hold, and SIP are only available in semi-continuous operating mode.
The following procedures offer a similar functionality:
● Tableting (General) Procedure
● Tableting (Pharma) Procedure