Power Generation in a Gas Expander-Generator Procedure

Overview

A Power Generation in a Gas Expander-Generator Procedure can be created by selecting the following menu option:
Unit Procedures } Power Generation } in a Gas Expander-Generator

Gas_Expander.bmp

 

Operating Mode

Continuous or Semi-Continuous

Host Equipment

Gas Expander-Generator

Emissions Port (Vent)

No

Special Input/Output Ports

No

 

 

This unit procedure models the production of power by gas expansion in a gas expander-generator.

Special Inputs / Outputs

      Inlet (High P): the designated input port for the high-pressure gas feed.

      Outlet (Low P): the designated output port for the low-pressure gas exhaust.

Operations

The following operation types are currently supported in the context of this unit procedure:

      Expand, see Power Generation in a Gas Expander-Generator

      CIP, see Clean-In-Place (CIP)

      Hold, see Holding

      SIP, see Steam-In-Place (SIP)

Note that operations CIP, Hold, and SIP are only available in semi-continuous operating mode.

SEe Also

The following procedures offer a similar functionality:

      Power Generation in a Straight Flow Steam Turbine-Generator Procedure

      Power Generation in an Extraction Steam Turbine-Generator Procedure