Operating Mode
Continuous or Semi-Continuous
Host Equipment
Emissions Port (Vent)
No
Special Input/Output Ports
No
A Power Generation in a Straight Flow Steam Turbine-Generator Procedure can be created by selecting the following menu option:
Unit Procedures } Power Generation } in a Straight-Flow Steam Turbine-Generator
|
|
Operating Mode |
Continuous or Semi-Continuous |
|
Host Equipment |
||
|
Emissions Port (Vent) |
No |
|
|
Special Input/Output Ports |
No |
|
|
|
|
This unit procedure models the production of power by steam expansion in a straight flow steam turbine-generator.
● Inlet (High P): the designated input port for the high-pressure steam feed.
● Outlet (Low P): the designated output port for the low-pressure steam exhaust.
The following operation types are currently supported in the context of this unit procedure:
● Expand, see Power Generation in a Steam Turbine-Generator
● CIP, see Clean-In-Place (CIP)
● Hold, see Holding
● SIP, see Steam-In-Place (SIP)
Note that operations CIP, Hold, and SIP are only available in semi-continuous operating mode.
The following procedures offer a similar functionality:
● Power Generation in an Extraction Steam Turbine-Generator Procedure
● Power Generation in a Gas Expander-Generator Procedure