Mixer-Settler Extraction Procedure

Overview

A Mixer-Settler Extraction Procedure can be created by selecting the following menu option:
Unit Procedures } Extraction } Liquid Extraction } in a Mixer / Settler

	Operating Mode	Continuous or Semi-Continuous
	Host Equipment	Mixer-Settler Extractor
	Emissions Port (Vent)	No
	Special Input/Output Ports	Yes

This unit procedure simulates partitioning of solutes between two liquid phases in a Mixer-Settler extractor.

Special Inputs / Outputs

●      Heavy Phase Input: the designated input port for the heavy phase.

●      Light Phase Input: the designated input port for the light phase.

●      Light Phase Output: the designated output port for the light phase.

●      Heavy Phase Output: the designated output port for the heavy phase.

Operations

The following operation types are currently supported in the context of this unit procedure:

●      Extract, see Mixer-Settler Extraction

●      CIP, see Clean-In-Place (CIP)

●      Hold, see Holding

●      SIP, see Steam-In-Place (SIP)

Note that operations CIP, Hold, and SIP are only available in semi-continuous operating mode.

SEe Also

The following procedures offer a similar functionality:

●      Differential Extraction Procedure

●      Centrifugal Extraction Procedure