Heat Exchanging Procedure

Overview

A Heat Exchanging Procedure can be created by selecting the following menu option:
Unit Procedures } Heat Exchange } Heat Exchanging

	Operating Mode	Continuous or Semi-Continuous
	Host Equipment	Heat Exchanger
	Emissions Port (Vent)	No
	Special Input/Output Ports	Yes

This unit procedure models the exchange of heat between a hot and a cold stream.

Special Inputs / Outputs

●      Shell-Side Input: the designated input port for the shell-side stream.

●      Tube-Side Input: the designated input port for the tube-side stream.

●      Tube-Side Output: the designated output port for the tube-side stream.

●      Shell-Side Output: the designated output port for the shell-side stream.

Operations

The following operation types are currently supported in the context of this unit procedure:

●      Exchange Heat, see Heat Exchanging

●      CIP, see Clean-In-Place (CIP)

●      Hold, see Holding

●      SIP, see Steam-In-Place (SIP)

Note that operations CIP, Hold, and SIP are only available in semi-continuous operating mode.

See Also

The following procedures offer a similar functionality:

●      Heating Procedure

●      Cooling Procedure

The following procedures offer a similar functionality:

●      Heating Procedure

●      Cooling Procedure