A Flash Evaporation Procedure can be created by selecting the following menu option:
Unit Procedures } Phase Change } Flash Evaporation
|
Operating Mode |
Continuous or Semi-Continuous |
Host Equipment |
||
Emissions Port (Vent) |
No |
|
Special Input/Output Ports |
Yes |
|
|
|
This unit procedure simulates separation of volatile compounds in a Flash Drum. Several thermodynamic model options are available for handling the VLE calculations.
● Vapor Output: the designated output port for vapor.
● Liquid Output: the designated output port for liquid.
The following operation types are currently supported in the context of this unit procedure:
● Flash, see Flash Evaporation
● CIP, see Clean-In-Place (CIP)
● Hold, see Holding
● SIP, see Steam-In-Place (SIP)
Note that operations CIP, Hold, and SIP are only available in semi-continuous operating mode.
The following procedures offer a similar functionality:
● Thin Film Evaporation Procedure
● Continuous (Rigorous) Distillation Procedure