Operating Mode
Continuous or Semi-Continuous
Host Equipment
Emissions Port (Vent)
No
Special Input/Output Ports
Yes
A Custom Mixing Procedure can be created by selecting the following menu option:
Unit Procedures } Mixing } Bulk Flow } Custom
|
|
Operating Mode |
Continuous or Semi-Continuous |
|
Host Equipment |
||
|
Emissions Port (Vent) |
No |
|
|
Special Input/Output Ports |
Yes |
|
|
|
|
This procedure can represent any scheme that mixes two bulk flow streams, where one of the two (the top) streams (of known composition, but adjustable flow) is allowed to assume any value in order to meet a specification in the outlet.
● Adjustable Inlet: the designated input port for the adjustable inlet stream.
● Process Stream: the designated input port for the process stream.
The following operation types are currently supported in the context of this unit procedure:
● Mix, see Custom Mixing
● CIP, see Clean-In-Place (CIP)
● Hold, see Holding
● SIP, see Steam-In-Place (SIP)
Note that operations CIP, Hold, and SIP are only available in semi-continuous operating mode.
The following procedures offer a similar functionality:
● 2-Stream Mixing (Bulk Flow) Procedure
● 2-Stream Mixing (Discrete Flow) Procedure