2-Stream Mixing (Bulk Flow) Procedure

Overview

A 2-Stream Mixing (Bulk Flow) Procedure can be created by selecting the following menu option:
Unit Procedures } Mixing } Bulk Flow } 2-Stream

	Operating Mode	Continuous or Semi-Continuous
	Host Equipment	Mixer
	Emissions Port (Vent)	No
	Special Input/Output Ports	No

This procedure can represent any scheme that mixes two bulk flow streams and cannot be modeled (or is not necessary to be modeled) in more detail.

Special Inputs / Outputs

None.

Operations

The following operation types are currently supported in the context of this unit procedure:

●      Mix, see 2-Stream Mixing (Bulk Flow)

●      CIP, see Clean-In-Place (CIP)

●      Hold, see Holding

●      SIP, see Steam-In-Place (SIP)

Note that operations CIP, Hold, and SIP are only available in semi-continuous operating mode.

SEe Also

The following procedures offer a similar functionality:

●      3-Stream Mixing (Bulk Flow) Procedure

●      4-Stream Mixing (Bulk Flow) Procedure

●      5-Stream Mixing (Bulk Flow) Procedure

●      6-Stream Mixing (Bulk Flow) Procedure

●      7-Stream Mixing (Bulk Flow) Procedure

●      8-Stream Mixing (Bulk Flow) Procedure

●      9-Stream Mixing (Bulk Flow) Procedure

●      2-Stream Mixing (Discrete Flow) Procedure