A Continuous Storage in a Tote Procedure can be created by selecting the following menu option:
Unit Procedures } Storage/Blending } Bulk } Continuous } in a Tote
|
Operating Mode |
Continuous or Semi-Continuous |
Host Equipment |
||
Emissions Port (Vent) |
Yes |
|
Special Input/Output Ports |
No |
|
|
|
This unit procedure simulates storage of a continuous flow of solids in a tote.
None.
The following operation types are currently supported in the context of this unit procedure:
● Store, see Continuous Storage
● CIP, see Clean-In-Place (CIP)
● Hold, see Holding
● SIP, see Steam-In-Place (SIP)
Note that operations CIP, Hold, and SIP are only available in semi-continuous operating mode.
The following procedures offer a similar functionality:
● Batch Storage in a Tote Procedure
● Continuous Storage in a Blending Tank Procedure
● Continuous Storage in a Flat Bottom Tank Procedure
● Continuous Storage in a Receiver Tank Procedure
● Continuous Storage in a Horizontal Tank Procedure
● Continuous Storage in a Vertical-on-Legs Tank Procedure
● Continuous Storage in a Drum Procedure