Operating Mode
Continuous or Semi-Continuous
Host Equipment
Emissions Port (Vent)
Yes
Special Input/Output Ports
No
A Continuous Storage in a Flat Bottom Tank Procedure can be created by selecting the following menu option:
Unit Procedures } Storage/Blending } Bulk } Continuous } in a Flat Bottom Tank
|
|
Operating Mode |
Continuous or Semi-Continuous |
|
Host Equipment |
||
|
Emissions Port (Vent) |
Yes |
|
|
Special Input/Output Ports |
No |
|
|
|
|
This unit procedure simulates storage of a continuous flow in a flat bottom tank.
None.
The following operation types are currently supported in the context of this unit procedure:
● Store, see Continuous Storage
● CIP, see Clean-In-Place (CIP)
● Hold, see Holding
● SIP, see Steam-In-Place (SIP)
Note that operations CIP, Hold, and SIP are only available in semi-continuous operating mode.
The following procedures offer a similar functionality:
● Batch Storage in a Flat Bottom Tank Procedure
● Continuous Storage in a Blending Tank Procedure
● Continuous Storage in a Receiver Tank Procedure
● Continuous Storage in a Horizontal Tank Procedure
● Continuous Storage in a Vertical-on-Legs Tank Procedure
● Continuous Storage in a Drum Procedure
● Continuous Storage in a Tote Procedure