Continuous Storage in a Drum Procedure

Overview

A Continuous Storage in a Drum Procedure can be created by selecting the following menu option:
Unit Procedures } Storage/Blending } Bulk } Continuous } in a Drum

	Operating Mode	Continuous or Semi-Continuous
	Host Equipment	Liquids Drum
	Emissions Port (Vent)	Yes
	Special Input/Output Ports	No

This unit procedure simulates storage of a continuous flow in a drum.

Special Inputs / Outputs

None.

Operations

The following operation types are currently supported in the context of this unit procedure:

●      Store, see Continuous Storage

●      CIP, see Clean-In-Place (CIP)

●      Hold, see Holding

●      SIP, see Steam-In-Place (SIP)

Note that operations CIP, Hold, and SIP are only available in semi-continuous operating mode.

SEe Also

The following procedures offer a similar functionality:

●      Batch Storage in a Drum Procedure

●      Continuous Storage in a Blending Tank Procedure

●      Continuous Storage in a Flat Bottom Tank Procedure

●      Continuous Storage in a Receiver Tank Procedure

●      Continuous Storage in a Horizontal Tank Procedure

●      Continuous Storage in a Vertical-on-Legs Tank Procedure

●      Continuous Storage in a Tote Procedure