Operating Mode
Continuous or Semi-Continuous
Host Equipment
Emissions Port (Vent)
No
Special Input/Output Ports
Yes
A Belt Filtration Procedure can be created by selecting the following menu option:
Unit Procedures } Filtration } Belt
|
|
Operating Mode |
Continuous or Semi-Continuous |
|
Host Equipment |
||
|
Emissions Port (Vent) |
No |
|
|
Special Input/Output Ports |
Yes |
|
|
|
|
This unit procedure simulates sludge dewatering in a belt filter press. The material balances are based on the removal percentage of particulate components and the solids content of the cake.
● Wash Input: the designated input port for the wash stream.
● Feed: the designated input port for the feed stream.
● Product: the designated output port for the product stream.
● Wash Output: the designated output port for the wash stream.
The following operation types are currently supported in the context of this unit procedure:
● Filter, see Belt Filtration
● Hold, see Holding
Note that procedure Hold is only available in semi-continuous operating mode.
The following procedures offer a similar functionality:
● Screw Press Filtration Procedure
● Plate and Frame Filtration Procedure
● Rotary Vacuum Filtration Procedure