The Plug Flow Aerobic BioOxidation (PFAB) model can simulated any number of parallel or sequential reactions that may represent biochemical oxidation, hydrolysis, chemical oxidation, photolysis, nitrification, etc. The PFAB model assumes that axial mixing is negligible. This model can be used when the reaction kinetics are unknown or unimportant but the mass stoichiometry is known. If the reaction kinetics are important, please use the Kinetic Plug-Flow (PF) Aerobic Bio-Oxidation operation instead.
● Plug-Flow (PF) Stoichiometric Aerobic Bio-Oxidation Procedure
See Kinetic PF Aerobic Bio-Oxidation: Modeling Calculations.
The interface of this operation has the following tabs:
● Oper. Cond’s, see Aerobic Bio-Oxidation Operations: Oper. Conds Tab
● Volumes, see Continuous Vessel Operations (Design Mode): Volumes Tab and Continuous Vessel Operations (Rating Mode): Volumes Tab
● Reactions, see Stoichiometric Reaction/Fermentation Operation: Reactions Tab
● Vent/Emissions, see Agitated Tank Operations: Vent/Emissions Tab
● Sorption, see Environmental Reaction Operations: Sorption Tab
● Labor, etc, see Operations Dialog: Labor etc. Tab
● Description, see Operations Dialog: Description Tab
● Batch Sheet, see Operations Dialog: Batch Sheet Tab
● Scheduling, see Operations Dialog: Scheduling Tab