Variable

Default Value

Range

○ Adsorbed?
Check this box to specify a binding percentage for the corresponding component.

No

Yes/No

○ Binding %
The adsorbed amount of the corresponding component, expressed as percentage of the component’s mass in the feed stream.

0.0

0-100

● Overall Binding Efficiency (%)
The overall binding efficiency of the bed.

0.0

0-100

● Number of Units in Simultaneous Operation
The number of units that operate in parallel.

1

Positive

○ Breakthrough Time (min)
The actual duration of loading (per cycle).

120.0

Positive

○ Regeneration Time (min)
The actual duration of regeneration (per cycle).

60.0

Positive

○ Regeneration Solvent Inlet Stream
Indicates the input port that is connected to the regeneration inlet stream. If an input stream is already present at the selected port, then the button next to the selection is active. Click on the button to bring up the attached stream’s simulation dialog in order to provide the composition of the material being charged.

<None>

Dedicated Input Port

◙ Regeneration Solvent per Bed Volume (g/L)
The required amount of regeneration solvent expressed as mass per volume of bed.

500.0

Positive

◙ Regeneration Solvent per Mass Adsorbate (kg/kg)
The required amount of regeneration solvent expressed as mass per mass of adsorbate.

5.0

Positive

○ Power Type
Indicates the power type that is used by the operation. Click on the list box to bring up a list of available power types in order to select one.

<Std Power>

Any Power Type

○ Fan/Pump Efficiency (%)
The efficiency of the fan/pump employed during the operation.

80

0-100

● Power (kW)
The power consumed for the operation (per cycle).

0.0

Positive

● Linear Velocity (cm/h)
The linear velocity of gas in the bed.

0.0

Positive