Operating Mode
Continuous or Semi-Continuous
Host Equipment
Emissions Port (Vent)
Yes
Special Input/Output Ports
Yes
A Stoichiometric Well-Mixed (WM) Aerobic Bio-Oxidation Procedure can be created by selecting the following menu option:
Unit Procedures } Continuous Reaction } Environmental Reaction } Stoichiometric } WM Aerobic BioOxidation
|
|
Operating Mode |
Continuous or Semi-Continuous |
|
Host Equipment |
||
|
Emissions Port (Vent) |
Yes |
|
|
Special Input/Output Ports |
Yes |
|
|
|
|
This procedure is used to represent the transformation (e.g., bio-oxidation, chemical oxidation, hydrolysis, photolysis, nitrification, sorption, etc.) of organic and other compounds in a well-mixed basin under aerobic conditions. Any number of reactions in sequence can be specified by stoichiometry. The model performs rigorous VOC emission calculations for surface and diffused aeration systems.
● Feed: the designated input port for the feed stream.
● Gas Input: the designated input port for the source of oxygen.
● Gas Output: the designated output port for VOC emissions.
● Product: the designated output port for the reaction products.
The following operation types are currently supported in the context of this unit procedure:
● Bio-Oxidize (Stoich.), see Pressure...
● Hold, see Holding
Note that operation Hold is only available in semi-continuous operating mode.
The following procedures offer a similar functionality:
● Kinetic Well-Mixed (WM) Aerobic Bio-Oxidation Procedure
● Plug-Flow (PF) Stoichiometric Aerobic Bio-Oxidation Procedure
● Kinetic Plug-Flow (PF) Aerobic Bio-Oxidation Procedure