A Steam Generation Procedure can be created by selecting the following menu option:
Unit Procedures } Power Generation } Steam Generation
|
Operating Mode |
Continuous or Semi-Continuous |
Host Equipment |
||
Emissions Port (Vent) |
No |
|
Special Input/Output Ports |
Yes |
|
|
|
This unit procedure model simulates steam generation in a Steam Generator/Boiler.
● Feedwater: the designated input port for feedwater.
● Fuel: the designated input port for fuel.
● Air: the designated input port for air.
● Flue Gas: the designated output port for flue gas.
● Steam: the designated output port for steam.
● Ash: the designated output port for ash.
The following operation types are currently supported in the context of this unit procedure:
● Generate Steam, see Steam Generation
● CIP, see Clean-In-Place (CIP)
● Hold, see Holding
● SIP, see Steam-In-Place (SIP)
Note that operations CIP, Hold, and SIP are only available in semi-continuous operating mode.