A Power Generation in a Fuel Cell Procedure can be created by selecting the following menu option:
Unit Procedures } Power Generation } in a Fuel Cell
|
Operating Mode |
Continuous or Semi-Continuous |
Host Equipment |
||
Emissions Port (Vent) |
No |
|
Special Input/Output Ports |
Yes |
|
|
|
This unit procedure model simulates power generation in a Fuel Cell.
● Fuel Inlet: the designated input port for fuel.
● Oxidant Inlet: the designated input port for oxidant (air or oxygen).
● Fuel Outlet: the designated output port for fuel.
● Oxidant Outlet: the designated output port for oxidant.
The following operation types are currently supported in the context of this unit procedure:
● React, see Power Generation in a Fuel Cell
● CIP, see Clean-In-Place (CIP)
● Hold, see Holding
● SIP, see Steam-In-Place (SIP)
Note that operations CIP, Hold, and SIP are only available in semi-continuous operating mode.