Operating Mode
Continuous or Semi-Continuous
Host Equipment
Emissions Port (Vent)
No
Special Input/Output Ports
No
A Nano-Milling Procedure can be created by selecting the following menu option:
Unit Procedures } Homogenization/Milling } Nano Milling
|
|
Operating Mode |
Continuous or Semi-Continuous |
|
Host Equipment |
||
|
Emissions Port (Vent) |
No |
|
|
Special Input/Output Ports |
No |
|
|
|
|
This unit procedure is used to simulate the thorough homogenization and mixing of suspension mixtures. It is a common processing step in pharmaceutical dosage formulation when the active pharmaceutical ingredient (API) is not soluble in water.
None.
The following operation types are currently supported in the context of this unit procedure:
● Homogenize, see Nano-Milling
● CIP, see Clean-In-Place (CIP)
● Hold, see Holding
SIP, see Steam-In-Place (SIP)
Note that operations CIP, Hold, and SIP are only available in semi-continuous operating mode.
The following procedures offer a similar functionality:
High Pressure Homogenization Procedure