Operating Mode
None
Host Equipment
None
Emissions Port (Vent)
No
Special Input/Output Ports
No
A Design Spec (Flow) Procedure can be created by selecting the following menu option:
Unit Procedures } Design Spec } Flow
|
|
Operating Mode |
None |
|
Host Equipment |
None |
|
|
Emissions Port (Vent) |
No |
|
|
Special Input/Output Ports |
No |
|
|
|
|
This unit procedure can be used to force an intermediate (or output) stream’s flow to match a user-defined level. The user must choose an input stream, whose flow will be adjusted until the desired flow is achieved on the target stream.
None.
The following operation types are currently supported in the context of this unit procedure:
● Design Spec (Flow), see Design Spec (Flow)
The following procedures offer a similar functionality:
Design Spec (Composition) Procedure
Design Spec (Temperature) Procedure