Design Spec (Composition) Procedure

A Design Spec (Composition) Procedure can be created by selecting the following menu option:
Unit Procedures } Design Spec } Composition

	Operating Mode	None
	Host Equipment	None
	Emissions Port (Vent)	No
	Special Input/Output Ports	No

This unit procedure can be used to force an intermediate (or output) stream’s flow to match a user-defined level. The user must choose an input stream, whose flow will be adjusted until the desired flow is achieved on the target stream.

Special Inputs / Outputs

None.

Operations

The following operation types are currently supported in the context of this unit procedure:

●      Design Spec (Concentration), see Design Spec (Composition)

SEe Also

The following procedures offer a similar functionality:

Design Spec (Flow) Procedure

Design Spec (Temperature) Procedure