Operating Mode
Continuous or Semi-Continuous
Host Equipment
Emissions Port (Vent)
Yes
Special Input/Output Ports
No
A Continuous Kinetic Reaction Procedure in a Fermentor can be created by selecting the following menu option:
Unit Procedures } Continuous Reaction } Kinetic } in a Fermentor
|
|
Operating Mode |
Continuous or Semi-Continuous |
|
Host Equipment |
||
|
Emissions Port (Vent) |
Yes |
|
|
Special Input/Output Ports |
No |
|
|
|
|
This procedure is used to represent a sequence of continuous reactions (biotransformations) that take place in a Fermentor and which are described by stoichiometry and kinetics.
None.
The following operation types are currently supported in the context of this unit procedure:
● Ferment (Kinetic), see Continuous Kinetic Fermentation
● CIP, see Clean-In-Place (CIP)
● Hold, see Holding
● SIP, see Steam-In-Place (SIP)
Note that operations CIP, Hold, and SIP are only available in semi-continuous operating mode.
The following procedures offer a similar functionality:
● Continuous Stoichiometric Reaction Procedure in a Fermentor
● Continuous Stoichiometric Reaction Procedure in a Seed Fermentor
● Continuous Stoichiometric Reaction Procedure in an Air Lift Fermentor
● Continuous Kinetic Reaction Procedure in a Seed Fermentor