Continuous Cooling Crystallization Procedure

Overview

A Continuous Crystallization Procedure can be created by selecting the following menu option:
Unit Procedures } Phase Change } Cont. Cooling Crystallization

	Operating Mode	Continuous or Semi-Continuous
	Host Equipment	Cooling Crystallizer
	Emissions Port (Vent)	No
	Special Input/Output Ports	Yes

This unit procedure model simulates thin film evaporation.

Special Inputs / Outputs

●      Vapor: the designated output port for vapor.

●      Product (Crystals): the designated output port for the produced crystals.

Operations

The following operation types are currently supported in the context of this unit procedure:

●      Crystallize, see Continuous Cooling Crystallization

●      CIP, see Clean-In-Place (CIP)

●      Hold, see Holding

●      SIP, see Steam-In-Place (SIP)

Note that operations CIP, Hold, and SIP are only available in semi-continuous operating mode.

See Also

The following procedures offer a similar functionality:

●      Batch Vessel Procedure in a Reactor

●      Continuous Evaporative Crystallization Procedure