Continuous 1x2 Reaction/Separation Generic Box Procedure

Overview

A Continuous 1x2 Reaction/Separation Generic Box Procedure can be created by selecting the following menu option:
Unit Procedures } Generic Boxes } Bulk Flow } Continuous } 1x2 Reaction/Separation

	Operating Mode	Continuous or Semi-Continuous
	Host Equipment	Continuous 1x2 GBX
	Emissions Port (Vent)	No
	Special Input/Output Ports	No

This unit procedure can be used to represent continuous processing steps that are not explicitly available in the current version of SuperPro Designer. It can simulate material transformations (reaction) and / or simple pass through steps as well as flow or component splitting.

Special Inputs / Outputs

None.

Operations

The following operation types are currently supported in the context of this unit procedure:

●      React, see Continuous Stoichiometric Reaction/Separation in a GBX

●      CIP, see Clean-In-Place (CIP)

●      Hold, see Holding

●      SIP, see Steam-In-Place (SIP)

Note that operations CIP, Hold, and SIP are only available in semi-continuous operating mode.

SEe Also

The following procedures offer a similar functionality:

●      Continuous 1x1 Pass Through Generic Box Procedure

●      Continuous 1x1 Reaction in a Generic Box Procedure

●      Continuous 2x2 Reaction/Separation Generic Box Procedure

●      Continuous 3x2 Reaction/Separation Generic Box Procedure