A Compression in a Centrifugal Compressor Procedure can be created by selecting the following menu option:
Unit Procedures } Transport (near) } Gases } by Centrifugal Compressor
![]()
|
Operating Mode |
Continuous or Semi-Continuous |
Host Equipment |
||
Emissions Port (Vent) |
No |
|
Special Input/Output Ports |
No |
|
|
|
This unit procedure models transport of gaseous materials using a centrifugal compressor.
None.
The following operation types are currently supported in the context of this unit procedure:
● Compress, see Compression
● CIP, see Clean-In-Place (CIP)
● Hold, see Holding
● SIP, see Steam-In-Place (SIP)
Note that operations CIP, Hold, and SIP are only available in semi-continuous operating mode.
The following procedures offer a similar functionality:
● Gas Transport by Centrifugal Fan Procedure
● Pumping by a Vacuum Pump Procedure