A 9-Stream Mixing (Bulk Flow) Procedure can be created by selecting the following menu option:
Unit Procedures } Mixing } Bulk Flow } 9-Stream
|
Operating Mode |
Continuous or Semi-Continuous |
Host Equipment |
||
Emissions Port (Vent) |
No |
|
Special Input/Output Ports |
No |
|
|
|
This procedure can represent any scheme that mixes nine bulk flow streams, and cannot be modeled (or is not necessary to be modeled) in more detail.
None.
The following operation types are currently supported in the context of this unit procedure:
● Mix, see 9-Stream Mixing (Bulk Flow)
● CIP, see Clean-In-Place (CIP)
● Hold, see Holding
● SIP, see Steam-In-Place (SIP)
Note that operations CIP, Hold, and SIP are only available in semi-continuous operating mode.
The following procedures offer a similar functionality:
● 2-Stream Mixing (Bulk Flow) Procedure
● 3-Stream Mixing (Bulk Flow) Procedure
● 4-Stream Mixing (Bulk Flow) Procedure
● 5-Stream Mixing (Bulk Flow) Procedure
● 6-Stream Mixing (Bulk Flow) Procedure
● 7-Stream Mixing (Bulk Flow) Procedure
● 8-Stream Mixing (Bulk Flow) Procedure
● 9-Stream Mixing (Discrete Flow) Procedure