5-Way Component Splitting Procedure

Overview

A 5-Way Component Splitting Procedure can be created by selecting the following menu option:
Unit Procedures } Splitting } Component Flow } 5-Way

	Operating Mode	Continuous or Semi-Continuous
	Host Equipment	Component Splitter
	Emissions Port (Vent)	No
	Special Input/Output Ports	No

This procedure can represent any scheme that splits five bulk flow streams on a component-by-component basis; it can be used to simulate any separation model that cannot be modeled (or is not necessary to be modeled) in more detail.

Special Inputs / Outputs

None.

Operations

The following operation types are currently supported in the context of this unit procedure:

●      Split, see 5-Way Component Splitting

●      CIP, see Clean-In-Place (CIP)

●      Hold, see Holding

●      SIP, see Steam-In-Place (SIP)

Note that operations CIP, Hold, and SIP are only available in semi-continuous operating mode.

See Also

The following procedures offer a similar functionality:

●      2-Way Component Splitting Procedure

●      3-Way Component Splitting Procedure

●      4-Way Component Splitting Procedure

●      6-Way Component Splitting Procedure

●      7-Way Component Splitting Procedure

●      8-Way Component Splitting Procedure

●      9-Way Component Splitting Procedure

●      5-Way Flow Splitting (Bulk Flow) Procedure

●      5-Way Flow Splitting (Discrete Flow) Procedure