Operating Mode
Continuous or Semi-Continuous
Host Equipment
Emissions Port (Vent)
No
Special Input/Output Ports
No
A 10-Way Flow Distribution Procedure can be created by selecting the following menu option:
Unit Procedures } Splitting } Bulk Flow } 10-Way Flow Distribution
|
|
Operating Mode |
Continuous or Semi-Continuous |
|
Host Equipment |
||
|
Emissions Port (Vent) |
No |
|
|
Special Input/Output Ports |
No |
|
|
|
|
This procedure can represent any scheme that splits flow up to ten bulk flow streams. The stream flowrate is specified either by the user, or the downstream process. It can be used to represent a distribution panel.
None.
The following operation types are currently supported in the context of this unit procedure:
● Split, see 10-Way Flow Distribution
● CIP, see Clean-In-Place (CIP)
● Hold, see Holding
● SIP, see Steam-In-Place (SIP)
Note that operations CIP, Hold, and SIP are only available in semi-continuous operating mode.
The following procedures offer a similar functionality:
● 3-Way Flow Distribution Procedure
● 5-Way Flow Distribution Procedure