The following table shows a brief description of the variables appearing in this tab. The table also displays their default values and their generally acceptable range:
|
Variable |
Default Value |
Range |
|
|
||
|
◙ Oil Components Removal % |
0.0 |
0 – 100 |
|
◙ Solid Components Removal (%) |
0.0 |
0 – 100 |
|
○ Oil Concentration in Oil Stream (g/L) |
15.0 |
Positive |
|
○ Solids Concentration in Sludge Stream (g/L) |
15.0 |
Positive |
Symbol Key: ○ User-specified value (always input); ● Calculated value (always output); ◙ Sometimes input, sometimes output
The following list describes the available specification choices in this tab; for more details on how these are implemented, see IP Clarification: Modeling Calculations.
•Oil Components Removal %...
The percentage removal of oil globule and particulate solid components is either calculated by the program or specified by the user.