● General Operation Variables
● Generic Wash operation specific variable as listed in the following table:
|
Variable |
Variable ID (varID) |
Data Type |
Extra Arg (val2) and type |
I/O
|
|
Operating Option |
operatingOption_VID |
Long1 |
|
I/O |
|
Volume Specification Option |
volumeSpecOption_VID |
Long2 |
|
I/O |
|
Wash Volume |
washVolume_VID |
Double |
|
I/O |
|
Wash-in Volume per Volume of Equipment Contents |
relativeWashVolume_VID |
Double |
|
I/O |
|
Wash-in per Equipment Volume |
relativeWashVolume2_VID |
Double |
|
I/O |
|
Contained Amount Before |
massBefore_VID |
Double |
Component Index |
O |
|
Loss Fraction |
removalFrac_VID |
Double |
Component Index |
O |
|
Contained Amount After |
massAfter_VID |
Double |
Component Index |
O |
|
Wash Volumetric Flowrate |
washVolFlow_VID |
Double |
|
I/O |
|
Wash Loss Fraction |
washLossFrac_VID |
Double |
|
I/O |
●
Long1: Note that you can use the following correspondence between the number and the operating option:
|
Operating Option |
Long |
|
Time and Flowrate |
1 |
|
Time and Volume |
2 |
Long2: Note that you can use the following correspondence between the number and the volume specification option:
|
Operating Option |
Long |
|
Available in Stream |
0 |
|
Set Volume |
1 |
|
Set Relative Volume |
2 |