Operating Mode
Continuous or Semi-Continuous
Host Equipment
Emissions Port (Vent)
Yes
Special Input/Output Ports
Yes
A Stoichiometric Anoxic Reaction Procedure can be created by selecting the following menu option:
Unit Procedures } Continuous Reaction } Environmental Reaction } Stoichiometric } Anoxic Reaction
|
|
Operating Mode |
Continuous or Semi-Continuous |
|
Host Equipment |
||
|
Emissions Port (Vent) |
Yes |
|
|
Special Input/Output Ports |
Yes |
|
|
|
|
This procedure is used to represent transformations (primarily denitrification) that take place under anoxic conditions. Any number of reactions in sequence can be specified by stoichiometry.
● Gas Output: the designated output port for VOC emissions.
● Product: the designated output port for the reaction products.
The following operation types are currently supported in the context of this unit procedure:
● Bio-React (Stoich.), see Stoichiometric Anoxic Reaction
● Hold, see Holding
Note that operation Hold is only available in semi-continuous operating mode.
The following procedure offers a similar functionality:
● Kinetic Anoxic Reaction Procedure
● Stoichiometric Anaerobic Digestion Procedure
● Kinetic Anaerobic Digestion Procedure
● Trickling Filtration Procedure