6-Stream Mixing (Discrete Flow) Procedure

Overview

A 6-Stream Mixing (Discrete Flow) Procedure can be created by selecting the following menu option:
Unit Procedures } Mixing } Discrete Flow } 6-Stream

	Operating Mode	Continuous or Semi-Continuous
	Host Equipment	Discrete Mixer
	Emissions Port (Vent)	No
	Special Input/Output Ports	No

This procedure can represent any scheme that mixes six discrete flow streams, and cannot be modeled (or is not necessary to be modeled) in more detail.

Special Inputs / Outputs

None.

Operations

The following operation types are currently supported in the context of this unit procedure:

●      Mix, see 6-Stream Mixing (Discrete)

●      CIP, see Clean-In-Place (CIP)

●      Hold, see Holding

●      SIP, see Steam-In-Place (SIP)

Note that operations CIP, Hold, and SIP are only available in semi-continuous operating mode.

See Also

The following procedures offer a similar functionality:

●      2-Stream Mixing (Discrete Flow) Procedure

●      3-Stream Mixing (Discrete Flow) Procedure

●      4-Stream Mixing (Discrete Flow) Procedure

●      5-Stream Mixing (Discrete Flow) Procedure

●      7-Stream Mixing (Discrete Flow) Procedure

●      8-Stream Mixing (Discrete Flow) Procedure

●      9-Stream Mixing (Discrete Flow) Procedure

●      6-Stream Mixing (Bulk Flow) Procedure