Variable

Default Value

Range

◙ Exit Temperature (^oC)
The temperature of the product stream that exits from the wet air oxidizer.

145.0

Positive

◙ Heating Duty (kcal/h)
The heat transfer rate of the heating agent, if a heating agent is used.

0.0

Positive

◙ Cooling Duty (kcal/h)
The heat transfer rate of the cooling agent, if a cooling agent is used.

0.0

Positive

○ Heat Transfer Agent Name
Indicates the heat transfer agent used for the operation. Click on the list box to bring up a list of available heat transfer agents in order to select one.

<Steam>

Any Heat Transfer Agent

● Inlet Temp. (^oC)
The inlet temperature of the heat transfer agent.

152.0

Positive

● Outlet Temp. (^oC)
The outlet temperature of the heat transfer agent.

152.0

Positive

● Rate (kg/h)
The mass flow rate of the heat transfer agent.

0.0

Positive

○ Heat Transfer Efficiency(%)
The heat transfer agent efficiency. If the value is lower than 100% then an increased heat transfer agent amount will be calculated by the program to satisfy the required duty.

100.0

[0,100)

○ Pressure Set by User
Check this box to set the operating pressure of the wet air oxidizer.

Yes

Yes/No

◙ Pressure (atm)
The operating pressure of the wet air oxidizer.

5.0

Positive

● Inlet Stream
Indicates the input port that is connected to the gaseous stream that is used as oxygen source. If an inlet stream is already present at the selected port, then the button next to the selection is active. Click on the button to bring up the attached stream’s simulation dialog in order to provide its composition.

<None>

Dedicated Input Port

○ Excess Amount Set by User
Check this box to set the excess amount of the oxygen component in the inlet stream.

Yes

Yes/No

◙ Excess Amount (%)
The % excess oxygen of the inlet stream.

0.0

0-100

○ Oxygen Comp
Indicates the pure component that represents oxygen. Click on the list box to bring up a list of registered pure components in order to select one.

<none>

Any Pure Component

○ Power Type
Indicates the power type that is used by the operation. Click on the list box to bring up a list of available power types in order to select one.

<Std Power>

Any Power Type

◙ Specific Power (kW/m³)
The power consumed by the operation per volume.

0.5

Positive

◙ Total Power (kW)
The total power consumed by the operation (per cycle).

0.0

Positive

◙ Power Per Unit (kW)
The power consumed by the operation per equipment unit.

0.0

Positive

○ Power Dissipation to Heat (%)
The percentage of total power consumed for this operation that turns into heat, thereby raising the temperature of the material contained in the equipment.

100.0

[0,100]

○ Actual Residence (Space) Time (h)
The actual residence time.

0.5

Positive

○ Min Required Residence (Space) Time (h)
The minimum required residence time.

0.5

Positive

○ Working / Vessel Volume (%)
The percent of the equipment’s volume that is occupied by the working fluid.

100.0

[0,100]

○ Working Volume (L)
The volume of the working fluid.

0.0

Positive