Wash (Generic): Contents Loss Tab

This tab appears on the interface dialog of the following operation (if the equipment has contents):

Variable Definitions, Ranges and Default Values

The following table shows a brief description of the variables appearing in this tab. The table also displays their default values and their generally acceptable range:

Variable	Default Value	Range

● Contained Amt Before (per Cycle, per Unit) (kg) The mass (per cycle and per unit) of each component contained in the equipment contents at the start of this operation.	0.0	Positive
○ Loss % The percent mass of each component contained in the equipment contents at the start of this operation that is lost to the wash stream.	0.0	0 – 100
● Retained Amt After (per Cycle, per Unit) (kg) The mass (per cycle and per unit) of each component contained in the equipment contents at the end of this operation.	0.0	Positive

Symbol Key: ○ User-specified value (always input); ● Calculated value (always output); ◙ Sometimes input, sometimes output

Specification Choices / Comments

The following list describes the available specification choices in this tab; for more details on how these are implemented, see Wash (Generic): Modeling Calculations.

This dialog allows the user to specify how much of the vessel contents are carried away by the wash stream.