Variable

Default Value

Range

◙ Final Temperature (^oC)
The temperature of the material at the end of the operation.

25.0

Positive

◙ Heating Duty (kcal/h)
The heat transfer rate of the heating agent, if a heating agent is used.

0.0

Positive

◙ Cooling Duty (kcal/h)
The heat transfer rate of the cooling agent, if a cooling agent is used.

0.0

Positive

○ Heat Transfer Agent Name
Indicates the heat transfer agent used for the operation. Click on the list box to bring up a list of available heat transfer agents in order to select one.

<Chilled Water>

Any Heat Transfer Agent

● Inlet Temp. (^oC)
The inlet temperature of the heat transfer agent.

5.0

Positive

● Outlet Temp. (^oC)
The outlet temperature of the heat transfer agent.

10.0

Positive

● Rate (kg/h)
The mass flow rate of the heat transfer agent.

0.0

Positive

○ Heat Transfer Efficiency(%)
The heat transfer agent efficiency. If the value is lower than 100% then an increased heat transfer agent amount will be calculated by the program to satisfy the required duty.

100.0

[0,100)

○ Power Type
Indicates the power type that is used by the operation. Click on the list box to bring up a list of available power types in order to select one.

<Std Power>

Any Power Type

◙ Power per Lamp (kW/m³)
The power consumed by the operation per volume of material and per lamp.

0.0

Positive

◙ Total Power (kW)
The total power consumed by the operation (per cycle).

0.0

Positive

◙ Power Per Unit (kW)
The power consumed by the operation per equipment unit.

0.0

Positive

○ Power Dissipation to Heat (%)
The percentage of total power consumed for this operation that turns into heat, thereby raising the temperature of the material contained in the equipment.

100.0

[0,100]

● Throughput (L/h)
The operating volumetric throughput of the operation.

0.0

Positive