Load and Split: Split Tab

Variable Definitions, Ranges and Default Values

The following table shows a brief description of the variables appearing in this tab. The table also displays their default values and their generally acceptable range:

Variable	Default Value	Range

○ Port / Stream #1 Indicates the output port that is connected to split stream #1. Click on the list box to bring up a list of available output streams in order to select one.	<None>	Any Output Port
○ Port / Stream #2 Indicates the output port that is connected to split stream #2. Click on the list box to bring up a list of available output streams in order to select one.	<None>	Any Output Port
○ % to Stream #1 The percentage of a component that is split to stream #1.	0.0	0-100
○ % to Stream #2 The percentage of a component that is split to stream #2.	0.0	0-100

Symbol Key: ○ User-specified value (always input); ● Calculated value (always output); ◙ Sometimes input, sometimes output

Specification Choices / Comments

The following list describes the available specification choices in this tab; for more details on how these are implemented, see Load and Split: Modeling Calculations.

If you want to remove some material as the simultaneously to the loading operation you can do this by specifying up to two output streams (port 1 / port 2).

For each component present in the process you can specify the percentage of its amount in the equipment that is to be removed via ports 1 & 2. The sum of the components percentage in these two streams cannot exceed 100.